meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
groups:mg:private:resonatoren:meerstetter:start [2018/09/04 12:42] – [Data Logging] ssauergroups:mg:private:resonatoren:meerstetter:start [2024/03/20 09:37] (current) – Admin: Syntax-Update (Migration from deprecated "fontcolor" plugin to "color" plugin) klaus
Line 90: Line 90:
   * connect the Meerstetter to your PC via a mini-USB B cable   * connect the Meerstetter to your PC via a mini-USB B cable
   * connect a power supply   * connect a power supply
-    * <fc #ff0000>!!!</fc> **ensure the Meerstetter is connected to a load, otherwise it might be damaged**+    * <color #ff0000>!!!</color> **ensure the Meerstetter is connected to a load, otherwise it might be damaged**
   * open the Meerstetter control software   * open the Meerstetter control software
   * make sure the Meerstetter is connected correctly and it says "ready" or "running" in the bottom left corner   * make sure the Meerstetter is connected correctly and it says "ready" or "running" in the bottom left corner
Line 98: Line 98:
     * on the right side of the panel there are multiple selection fields labelled "RES1" to "RES8"     * on the right side of the panel there are multiple selection fields labelled "RES1" to "RES8"
   * select the option you want to choose from the drop down menu corresponding to the pin the LED is connected to   * select the option you want to choose from the drop down menu corresponding to the pin the LED is connected to
-    * <fc #ff0000>!!!</fc> Information on what these options exactly mean can be found on pages 47 and 48 of the {{ :groups:mg:tec-family_user_manual_5134ad.pdf | manual }}+    * <color #ff0000>!!!</color> Information on what these options exactly mean can be found on pages 47 and 48 of the {{ :groups:mg:tec-family_user_manual_5134ad.pdf | manual }}
   * write the settings to the Meerstetter using the button in the bottom right corner   * write the settings to the Meerstetter using the button in the bottom right corner
  
Line 109: Line 109:
 The capacitors used were the big red foil capacitors by Wima with a capacitance of ca. 10µF. The choke is a [[wp>Choke_(electronics)#Common-mode_(CM)_chokes|common mode choke]] with multiple tens of mH. The capacitors used were the big red foil capacitors by Wima with a capacitance of ca. 10µF. The choke is a [[wp>Choke_(electronics)#Common-mode_(CM)_chokes|common mode choke]] with multiple tens of mH.
  
-==== Data Logging ==== 
  
-<fc #ff00ff>??? Verbindung zum Redlab überwachung! Geht auvch mit Grafana???</fc>