meta data for this page
  •  
Translations of this page:
  • en

This is an old revision of the document!

19.10.2016

  • I cleaned the vacuum chamber

  • I tested the M6 holes from vacuumchamber --> all threads are deep enough!

  • 2x M4-breadboards (Incouple and otcouple) and there spacers are done!
  • I assembled the mounting with vitonballs and zerodur rods. --> We need two vitonballs of each metal sheet side. Otherwise the mounting is to wobbly! --> 8x new sinkings for the vitonballs!