meta data for this page
  •  
Translations of this page:
  • en

This is an old revision of the document!

Incoupling breadboard components

Fiber collimator

Company: Schäfter+Kirchoff

  • Model: 60FC-4-A2.7-45
  • Housing diameter: 12mm
  • Focal length: 2.75mm
  • Coating: AR 1300-1750nm Coating sheet
  • NA: 0.55
  • Connection: FC/APC
  • Schrägorientierte Koppelachse
  • Integral focussing
  • Amagnetic collimators made from titanium on request
  • Infrared optics made of Chalcogenide glass for wavelengths > 1000 nm (see Technical Data, lens designed for λ = 2.5 μm)
  • 2D-drawing: 970920020518.pdf

Free beam optical isolator

Company: Nortus Optronic GmbH, Isowave

  • Model: I-15UHP-4
  • Serial Number: 45830
  • Wavelength: 1515-1585nm
  • Clear Aperture: 4mm
  • Isolation
    • Typ: 75dB
    • Minimum: >60dB
    • testet by 1550nm: 71dB
  • Transmission: 83% (90% Typ)
  • Ambient Temp: 23 °C
  • Insertion loss: 0.5dB
  • Test report

DS Polaristaor

Company: Qioptiq Phtonics GmbH Link: http://photonics.specpick.com/products/polarizers/edmund-optics-inc/36-434-g335753000

  • Article number: G335-753-000
    • Dimensions h=L1=L2: 10x10mm
    • Tolerance:
      • High h: -0.09mm
      • L1=L2: ±0.2mm
  • Wavelength: 1100-1700nm
  • Datasheet
  • Special beamsplitter coatings yield highly polarized transmitted beams
  • Combine extreme spectral bandwidth with superb extinction ratio and transmittance
  • Extinction ratio transmission > 10,000:1 (ΦTp : ΦTs) at ± 2°
  • No angular or lateral deflection of transmitted beams
  • Less than λ/4 wavefront distortion at 633 nm
  • Broadband coated with ARB2
  • Tp > 90%
  • Damage thresholds: > 2 kW/cm2 cw (488/514 nm)
  • Damage thresholds: > 200 mJ/cm2 for pulses of 10 ns (1064 nm)
  • Damage thresholds: > 28 mJ/cm2 for pulses of 280 fs (850 nm, 20 Hz)

Mirror holders

Company: Thorlabs

Mirrors

Company: Thorlabs

Mirror Sepcifications

Coating Specifications

  • Broadband Coatings: 1280-1600 nm
  • Ravg > 99% for S- and P-Polarizations for Angles of Incidence from 0 to 45°
  • Substrate material: Zerodur
    • Zerodur®'s coefficient of thermal expansion is 0 ± 0.100 x 10-6 /°C, which is significantly smaller than the value for fused silica, 0.55 x 10-6 /°C
  • Damage Threshold: 2.5 J/cm2 (1542 nm, 10 ns, 10 Hz, Ø0.181 mm)

Waveplate

λ/2

Company: Crylight

  • Typ: WP0210-1550 (with holder: WH1210) http://www.crylight.com/product/detail.jsp?myid=215879
  • Type: Opically contacted zero Order
  • Diameter: 10mm
  • Outer Diameter: 12.7 mm
  • Retardation: λ/2
  • Wavelength: 1550nm
  • Coating: AR/AR
  • Size tolerance: +/-0.2
  • Retardation tolerance: λ/300
  • Surface Quality: 40/20
  • Parallislm: <3”
  • Wavefront distortion: λ/8 @ 632.8nm
  • Clear aperuture: >90%
  • Optical axis tolerance: +/-0.3
  • Holder: WH1210
  • Test Protocol: Test Protocol-Waveplates

Waveplate Rotation Mount

Company: Thorlabs

  • Typ: RSP05/M https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=246
  • Mount Ø1/2“ Optics up to 5.8 mm Thick
  • Compact: 25.4 mm x 22.1 mm x 11.4 mm
  • Compatible with our SM05-Threaded Lens Tubes
  • One SM05RR Retaining Ring Included
  • Post Mountable via 8-32 (M4) Mounting Tap
  • The knurled edge of the RSP05(/M) and the 360° laser-engraved scale marked at 2° increments allow for precise

Linear Stages

Company: Newport

  • Typ: M-DS25-X https://www.newport.com/p/M-DS25-X
  • Axes of Travel: X
  • Maximum Stage Travel: 6.35 mm
  • Load Capacity: 45 N
  • Material: Aluminum
  • Centered Load Capacity with BM Micrometer: 11 N
  • Platform Size: 25 x 25 mm
  • Sensitivity: 1 µm

Lens

Lens

Company: Thorlabs

Lens holder

Company: Thorlabs

Beamsplitter Cube

Company: Thorlabs

Iris

Company: Thorlabs