meta data for this page
Translations of this page:
- en
This is an old revision of the document!
Fiber-Components
- How to work with fiber modulators:
- english: Modulatorfibel_english
- german: Modulatorfibel_german
Fiber AOM
Company: AMS Technologies AG, Gooch & Housego Torquay
RF power: 0.4 W. Absolute maximum rating. Higher power will cause damage.
- Typ: SFO4504-T-M080-0.5C8J-3-F2P
- Fiber-coupled acousto-optic modulator, model Fibre-Q http://www.amstechnologies.com/products/optical-technologies/components/optics/acousto-optics/view/fibre-coupled-acousto-optic-modulators/
- Material: Amtir
- Wavelength: 1550 nm
- Operation frequency: +80 MHz
- Polarisation maintaining fiber
- Fibre length: 0.3M
- Gibre-connector: FC/APC
- Datasheet:
- from AMS technologies: Datasheet_Fiber-AOM-G&HT_AMS
- from G&HT internetside: Datasheet_Fiber-AOM-G&HT_G&HT
- Testreport: Fiber-AOM-Testreport-G&H
RF power: <0.5 W. Absolute maximum rating. Higher power will cause damage.
- Typ: BRI-AMF-80-4-1550-2FP-FC/APC-0.3
- Fiber-coupled acousto-optic modulator,
- Material: Amtir
- Wavelength: 1550 nm
- Operation frequency: +80 MHz
- Polarisation maintaining fiber
- Fibre length: 0.3M
- Gibre-connector: FC/APC
- Datasheet: Datasheet_Fiber-AOM-Brimerose
- Test Protocol: Test Protocol_Fiber-AOM-Brimerose
Fiber EOM
Company: Jenoptik
Do not apply voltages higher than 40V peak-peak to RF input.
- Typ: PM1550
- Center wavelength: 1550 nm
- Insertion loss: 3.0 dB
- Electonic connector: SMA, Inputimpedanz: 50 Ohm
- U_pi@1kHz: 8.5 V
- Fiber-typ: PM
- Fiber-connector: FC/APC
- Fiber length: 1m
- Crystall: Lithiumniobat (Info_crystall)
- Max optical input power: 300mW cw
- Datasheet:
- german: Datasheet Fiber-Eom_german
- english: Datasheet Fiber-Eom_english
- supplied:
Fiber FRM
Company: Laser2000, General Photonics
- Typ: NFRM-15-FCA
- Operating Wavelength: 1550 nm
- Operating Bandwidth: ±50 nm
- Insertion Loss:
- typical: 0.3 dB
- max: 0.5 dB
- Faraday Rotation Angle: 90 degrees
- Rotation Angle Tolerance (Center Wavelength at 23 °C): ±1 degree
- Rotation Angle Wavelength Dependence: ±0.12 degree/nm
- Rotation Angle Temperature Dependence: ±0.12 degree/°C
- Reflection Polarization Dependence: 0.5% max.
- Optical Power Handling: 300 mW min.
- Operating Temperature 0 to 70 °C
- Storage Temperature: -40 to 85 °C
- Fiber Type: SMF-28
- Dimensions: Ø 9.5 × 50 mm (NoTail)
- Datasheet: frm.pdf
Fiber Coupler
50/50
Company: Opneti
- Typ: CS-PS-A-2×2-1550-50/50-900-5-0.25-FA-3×54
- Type: PS=PM Fused Coupler
- Grade: A=Grade
- Port Type: 2×2
- Wavelength: 1550
- Coupling Ratio: 50/50
- Pigtail Type: 900=900um Loose Tube
- Fiber Type: 5=Panda Fiber
- Length: 0.25m
- Connector: FA=FC/APC
- Package: φ3.0×54
- Datasheet: Datasheet Fiber-coupler_50/50_Opneti
- Test report:
