meta data for this page
Translations of this page:
- en
This is an old revision of the document!
Fiber-Components
- How to work with fiber modulators:
- english: Modulatorfibel_english
- german: Modulatorfibel_german
Fiber EOM
Company: Jenoptik
Do not apply voltages higher than 40V peak-peak to RF input.
- Typ: PM1550
- Center wavelength: 1550 nm
- Insertion loss: 3.0 dB
- Electonic connector: SMA, Inputimpedanz: 50 Ohm
- U_pi@1kHz: 8.5 V
- Fiber-typ: PM
- Fiber-connector: FC/APC
- Fiber length: 1m
- Crystall: Lithiumniobat (Info_crystall)
- Max optical input power: 300mW cw
- Datasheet:
- german: Datasheet Fiber-Eom_german
- english: Datasheet Fiber-Eom_english
- supplied:
Fiber Coupler
50/50
Company: Opneti
- Typ: CS-PS-A-2×2-1550-50/50-900-5-0.25-FA-3×54
- Type: PS=PM Fused Coupler
- Grade: A=Grade
- Port Type: 2×2
- Wavelength: 1550
- Coupling Ratio: 50/50
- Pigtail Type: 900=900um Loose Tube
- Fiber Type: 5=Panda Fiber
- Length: 0.25m
- Connector: FA=FC/APC
- Package: φ3.0×54
- Datasheet: Datasheet Fiber-coupler_50/50_Opneti
- Test report:
