meta data for this page
Translations of this page:
- en
This is an old revision of the document!
Fiber boxes 360x160
technical drawings for Inventor2018: \\afs\iqo.uni-hannover.de\user\jwolf\work\Resonator\Alugehäuse\Alugehäuse 360×160
| technical drwaing.pdf | |
|---|---|
| Alu-Box | alugehaeuse_360x160.pdf |
| Alu-base | made to match without drawing |
Components
Optics
Mechanics
- Alu-Box (Typ: ALS01135 - Best.Nr. M01163609)
- for thermal contact was milled of the painted surface on the inside and outside of the bottom
- Alu-base to allow to use optical components, while thermal contact is assured
- for fastening box and base are used four screw connections
Electronics
- 6x SMA connectors for
- 1x BNC connector (Typ: 1426195 Thorlabs) for
- 4x fiber conectors (Typ: )
- 4x fiber conectors (Typ: )
Fiber boxes 200x139
technical drawings: \\afs\iqo.uni-hannover.de\user\jwolf\work\Resonator\Alugehäuse\Alugehäuse 200×139
| technical drwaing.pdf | |
|---|---|
| module | alugehaeuse_200x139_-_baugruppe.pdf |
| Alu-box | alugehaeuse_200x139.pdf |
| Alu-base | made to match without drawing |
| Alu-board for AOM | iqo_aluplatte_aom_2.pdf |
Components
Optics
- AOM (Typ: …)
Mechanics
- Alu-Box (Typ: ALS01115 - Best.Nr. M01142009)
- for thermal contact was milled of the painted surface on the inside and outside of the bottom
- Alu-base to allow to use optical components, while thermal contact is assured
- for fastening box and base are used four screw connections
Electronics
- 4x SMA connectors for
- 1x BNC (Typ: 1426195 Thorlabs) connector for
- 4x fiber connectors (Typ: ) on two opposite sides