285 nm-Laser (S-MOT)

• Laser Enable: push “on”
• Output Power: change “Power Setpoint”
  • 0.500 W for Iode spectroscopy fiber coupling
  • 2 - 2.500 W for 285 nm-SHG-Lock
• Seedpower: ~ 20 mW

1. S-MOT-Laser connected
2. start “DigiLock - SN 01265 - S-MOT-Laser”: double click of S-MOT-Laser
   1. push “Scan on”
   2. push “AutoLock”
   3. change the “Offset Value” to 0 V
   4. change the “Setpoint” (under “AutoLock”) of max slop of the middle peak
   5. Push “PID: Lock to Slop”

The system was build by Jan Friebe and is described in his diplomathesis.

• Outputpower after cube to 285 nm-SHG: ~ 1.2 W @ 2.5 W
• Operationpower: < @ 3 W
• Max outpupower: ??? W @ ??? W

• Infront fiber: ~ 38 mW @ 0.500 W
• After fiber: ~ 29 mW @ 0.500 W (= 400 mV @ 0.500 W) [efficiency ~ 70 %]

• Infront fiber: ~ 220 mW @ 2.500 W
• After fiber: ~ 160 mW @ 2.500 W (= 2 V @ 2.500 W) [efficiency ~ 70 %]

• Outputpower: ~ … mW @ 2.000 W
• Outputpower: ~ 100 mW @ 2.500 W
• Power for photodiode: ~ … müW
• Stabilized power (infront AOM): 80 mW

• Power infront the AOM in … order: 80 mW
• Power behind the AOM: 43 mW @ 2.500 W (efficiency ~ 50 %)

• Power for the Zeaman-slower: … mW

• Power behind the mystical mirrow: … mW