meta data for this page
Translations of this page:
- en
This is an old revision of the document!
DDS
We have two types of DDS (Direct Digital Synthesis) with USB port or Serial port.
Use the right software for programming!
Default Values:
- You can use the “Internal Clock Frequency 400 MHz” or “External Clock Frequency: 100 MHz (Input power should be 10 dBm < P < 20 dBm)”.
- Input Powers for Divider Setup:
- f_in < 150 MHz ⇒ 10 dBm < P < 20 dBm
- f_in > 150 MHz ⇒ P ~ 0 dBm
USB-DDS
- Software … for USB Type PTB DDS
Umbau zum Frequenzteiler
Serial-DDS
- Software Terminal for Serial Type DDS
- Datasheet:
