Table of Contents

Connections to other Labs (IQ)

AtomLab - ResLab

Cable Application Informations
BNC 1 Beat with comb -
BNC 2 Photodiode behind cavity -
BNC 3 CCD behind cavity R1 -
BNC 4 Photodiode behind fiber RF: Fiberstabilization / mix down
DC: ~ 15-20 mW
BNC 5 External frequency
BNC 6 External Reset
BNC red -
BNC white -
BNC blue -
BNC yellow -
BNC green -
AirCell 5 10 MHz 10MHz distributor → Filter → Cable
LAN-cable PTB colour: red

Fiber

Fiber Application Informations
914 nm Clocklaser 20 mW
780 nm for beat measurements with the frequency comb -
Dublex-Fiber Fiberstabilization from Hannover to PTB -

Uni top - ResLab

Cable Application Informations
N-Connector / GPS Antenna on roof-label GPS Antenna Currently connected: JAVAD Ringant G3T (for Geo++ TRE-G3T GPS Receiver); Also available another antenna on top for K&K GPS Receiver

Qport - ResLab

Connections Application Informations
BNC / QPortRef-label 10 MHz from 10MHz distributor
BNC / QPortRef2-label 987.733 MHz; +2dBm from Marconi Synthesizer
Fiber 1064nm; ~75mW Mephisto-laser

Thijs - ResLab

Connections Application Informations
BNC / D220-label (AriCell-10) 10 MHz from 10MHz distributor