Table of Contents
Jour Fixe
Atomslab
Reslab
Jour Fixe
NJ, PG, WFP, kHz
Atomslab
TiSa SHG
Toptica does not tell anything about the waist in the cavity
Tried different incoupling lenses, but ended up to either end of the alignment
1.3 W @ f=100mm
Outcoupling beam cant kept symmetrically
Probably first collimation lense not perfectly collimating → You can't get the beam symmetrical over all beampath with the prism
It is crucial, to have the beam well collimated, since you can't compensate for an astigmatism with the prism.
Build a spare laser for L4 but in Littrow configuration
SWAP experiments
With SWAP light → Number of atoms still go down (7.5 µW, 20
MHz
detuned)
Going closer to resonance, line becomes narrower
Atomcount in the DT are low: TMOT?
Quench
Power optimized: Back to 40 mW infront of fiber
Now working on frequency stabilization and tuning it to resonance
Reslab
SS + NJ got the comb back working
Good modelock point
Next: Coupling to new PCF