====== Connections to other Labs (IQ) ======



===== AtomLab - ResLab =====

^ Cable      ^ Application                ^ Informations                ^
| BNC 1      | Beat with comb             | -                           |
| BNC 2      | Photodiode behind cavity   | -                           |
| BNC 3      | CCD behind cavity R1       | -                           |
| BNC 4      | Photodiode behind fiber    | RF: Fiberstabilization / mix down\\ DC: ~ 15-20 mW                    |
| BNC 5      | External frequency         |                             |
| BNC 6      | External Reset             |                             |
| BNC red      | -            |                             |
| BNC white     | -             |                             |
| BNC blue     | -            |                             |
| BNC yellow      | -            |                             |
| BNC green      | -           |                             |
| AirCell 5     | 10 MHz          | 10MHz distributor  -> Filter -> Cable                        |
| LAN-cable  | PTB                        | colour: red                 |



=== Fiber ===
^ Fiber      ^ Application                ^ Informations                ^
| 914 nm    | Clocklaser          | 20 mW                            |
| 780 nm    | for beat measurements with the frequency comb      | -                          |
| Dublex-Fiber     | Fiberstabilization from Hannover to PTB           | -                           |

===== Uni top - ResLab =====
^ Cable                                    ^ Application  ^ Informations                                                                                                                         ^
| N-Connector / GPS Antenna on roof-label  | GPS Antenna  | Currently connected: JAVAD Ringant G3T (for Geo++ TRE-G3T GPS Receiver); Also available another antenna on top for K&K GPS Receiver  |

===== Qport - ResLab =====
^ Connections              ^ Application                     ^ Informations                ^
| BNC / QPortRef-label     | 10 MHz                          |  from 10MHz distributor     |
| BNC / QPortRef2-label    | 987.733 MHz; +2dBm              |  from Marconi Synthesizer   |
| Fiber                    | 1064nm; ~75mW                   |  Mephisto-laser             |

===== Thijs - ResLab =====
^ Connections              ^ Application                     ^ Informations                ^
| BNC / D220-label (AriCell-10)    | 10 MHz                          |  from 10MHz distributor     |