Differences

This shows you the differences between two versions of the page.

--- groups:mg:tracker [2016/10/06 20:38] – ssauer
+++ groups:mg:tracker [2018/08/31 13:45] (current) – removed ssauer
@@ Line 1: / Line 1: @@
-====== Tracker ======
-**How to set a tracker?**
-  - Find out the input frequency with a spectrum analyzer
-  - Turn on the tracker ;-) (K+K counter and tracker have different pin assignments !)
-  - Turn the gain down to 0
-  - View the monitor output or A/B output frequency on the spectrum analyzer (Maybe too strong signal, dBm)
-  - Turn the frequency by means of the VCO rotary knob to the required frequency
-  - **Now** plug in the RF signal in the RF signal input
-  - Turn the gain up until you can see a better signal
-  - Done :-)
-Controversial discussion: Some people use the integrator and some people not. Usually we don´t use the integrator. If you want to use it, aktivate the integrator after step 7).\\
-  * If the tracker doesn´t work, turn off and on the complete power supply.