meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
groups:mg:project_ptb-cavity:vacuum [2017/01/18 14:39] – ssauergroups:mg:project_ptb-cavity:vacuum [2017/03/01 10:01] (current) – pkoopmann
Line 1: Line 1:
 ====== Vacuum ====== ====== Vacuum ======
  
- +  * [[:groups:Mg:Project PTB-Cavity:Vacuum:Vacuum components|CF-components and accessories]] 
-====== Vacuum components ====== +  * [[:groups:Mg:Project PTB-Cavity:Vacuum:Vacuum optics|Vacuum optics]] 
- +  * [[:groups:Mg:Project PTB-Cavity:Vacuum:Electronics inside the vacuum|Electronics inside the vacuum and accessories]] 
-===== Vacuum pump/controller/H.V. cable ===== +  * [[:groups:Mg:Project PTB-Cavity:Vacuum:seal material |Seal material and vacuum suitable glue]] 
- +  * [[:groups:Mg:Project PTB-Cavity:Vacuum:Vacuum screws |Vacuum screws]] 
-Company: Agilent Technologies +   
- +  * [[:groups:Mg:Project PTB-Cavity:Vacuum:Bake out|Bake out]]
-      * Typ: VACION PLUS 40 STARCELL PUMP BASIC PUMP(http://www.agilent.com/en-us/products/vacuum-technologies/high-vacuum-pumps/ion-pumps/vacion-plus-40) +
-      * Catalog: {{ :groups:mg:project_ptb-cavity:agilent_catalog_06_ion_section_120.pdf |}} +
-      * Manual: {{ :groups:mg:project_ptb-cavity:vacion_plus_40-55-75_pumps_user_manual.pdf |}} +
-      * Heater for Medium VIP Instructions: {{ :groups:mg:project_ptb-cavity:heater_for_medium_vip_instructions.pdf |}} +
-      * Auto Cad: http://www.agilent.com/cs/common/plusimages/VacIon-Plus-40-Ion-Pump-outline-drawing.png +
-      * Other informations: "Die einzigen Einflussgrößen auf die Stabilität des Druckes sind Gaslast und Ausgasung (eigentlich auch zur Gaslast gehörend)." +
- +
-===== Vacuum sensor ===== +
- +
-===== Vacuum valves ===== +
-==== Gate valve ==== +
- +
-==== Angle valve ==== +
- +
-===== Other vacuum CF-components ===== +
- +
- +
-===== Vacuum isolator ===== +
-  * Test report scan copy for vacuum compatible isolators: {{ :groups:mg:project_ptb-cavity:test_report_scan_copy_for_vacuum_compatible_isolators.pdf |}} +
- +
- +
- +
-===== Bake out ===== +
-  * We use the temperature monitoring design, made by E. Wodey, for the out of loop measurements during the out baking. +
-    * Talk by E. Wodey for the explanation of the monitoring system:{{ :groups:mg:project_ptb-cavity:2016-08_geoq_ctp_ew.pdf |}} +
-    * Box-design made by S. Sauer: {{:groups:mg:project_ptb-cavity:img_0342.jpg?200|}}  +
- +
- +
-==== Bake out list ==== +
- +
-^ Item            ^ Maximum temperature         ^ +
-| Mounting for the spacer     |     | +
-| Zerodur rods    |    | +
-| Viton balls |    | +
-| Glas balls |    | +
-| Heat shields      |     | +
-| Screws from the mounting    |     | +
-| Windows (inside and outside the vacuumchamber)   |    | +
-| Window holder   |    | +
-| ULE rings    |    | +
-| Vacuum chamber   |    | +
-| CF Cupper rings |    | +
-| CF Flanschkit |    | +
-| IGP   |    | +
-| IGP cable    |    | +
-| Vacuum pressure sensor |    | +
-| Vacuum pressure sensor cable    |    | +
-| Angle valve   |    | +
-|    |    | +
-| Sub-D Socket   |    | +
-| CF-Kreuz |    | +
-| Indium wire   |    | +
-| Indium foil |    | +
-| Capton wires   |    | +
-| Crimp pins |    | +
-| Peltier-elements  |    | +
-| NTC Sensors |    | +
-| Faraday rotator |    | +
-| Glue from faraday rotator |    | +
- +
-| ULE Spacer|    | +
-| Mirrors |    | +
-==== Bake out Protocol ==== +