meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
groups:mg:project_ptb-cavity:incoupling_breadboard [2017/05/12 11:17] – [Mirror holders] pkoopmanngroups:mg:project_ptb-cavity:incoupling_breadboard [2017/10/27 14:13] (current) – ssauer
Line 1: Line 1:
 ====== Incoupling breadboard components====== ====== Incoupling breadboard components======
  
-==== Fiber collimator ==== +===== Fiber collimator ===== 
-Company: Schäfter+Kirchoff http://www.sukhamburg.com/products/Fiber_collimators_60FC-_.html+Company: [[http://www.sukhamburg.com/products/Fiber_collimators_60FC-_.html|Schäfter+Kirchoff ]]
   * Model: 60FC-4-A2.7-45   * Model: 60FC-4-A2.7-45
 +    * Datasheet: {{ :groups:mg:project_ptb-cavity:fk60fc_e.pdf |}}
   * Housing diameter: 12mm   * Housing diameter: 12mm
   * Focal length: 2.75mm   * Focal length: 2.75mm
Line 13: Line 14:
   * Amagnetic collimators made from titanium on request   * Amagnetic collimators made from titanium on request
   * Infrared optics made of Chalcogenide glass for wavelengths > 1000 nm (see Technical Data, lens designed for λ = 2.5 μm)   * Infrared optics made of Chalcogenide glass for wavelengths > 1000 nm (see Technical Data, lens designed for λ = 2.5 μm)
 +  * 2D-drawing: {{ :groups:mg:project_ptb-cavity:970920020518.pdf |}}
  
  
-==== Free beam optical isolator ====+===== Free beam optical isolator =====
 Company: Nortus Optronic GmbH, Isowave\\ Company: Nortus Optronic GmbH, Isowave\\
   * Model: I-15UHP-4\\   * Model: I-15UHP-4\\
Line 35: Line 37:
   * Diameter: 19mm   * Diameter: 19mm
  
-==== DS Polaristaor ====+===== DS Polaristaor =====
 Company: Qioptiq Phtonics GmbH{{ :groups:mg:project_ptb-cavity:00036835_0.jpg?400|}} Company: Qioptiq Phtonics GmbH{{ :groups:mg:project_ptb-cavity:00036835_0.jpg?400|}}
 Link: http://photonics.specpick.com/products/polarizers/edmund-optics-inc/36-434-g335753000 Link: http://photonics.specpick.com/products/polarizers/edmund-optics-inc/36-434-g335753000
Line 57: Line 59:
   * Damage thresholds: > 28 mJ/cm2 for pulses of 280 fs (850 nm, 20 Hz)   * Damage thresholds: > 28 mJ/cm2 for pulses of 280 fs (850 nm, 20 Hz)
  
-==== Mirror holders ====+===== Mirror holders =====
 Company: Thorlabs Company: Thorlabs
   * Typ: Polaris-K05S1 https://www.thorlabs.com/thorproduct.cfm?partnumber=POLARIS-K05S1   * Typ: Polaris-K05S1 https://www.thorlabs.com/thorproduct.cfm?partnumber=POLARIS-K05S1
Line 67: Line 69:
  
  
-==== Mirrors ====+===== Mirrors =====
 Company: Thorlabs Company: Thorlabs
  
Line 82: Line 84:
   * Damage Threshold: 2.5 J/cm2 (1542 nm, 10 ns, 10 Hz, Ø0.181 mm)   * Damage Threshold: 2.5 J/cm2 (1542 nm, 10 ns, 10 Hz, Ø0.181 mm)
  {{:groups:mg:project_ptb-cavity:e04_dielectric_coating_unpolarized_8deg_780.gif?300|}}{{:groups:mg:project_ptb-cavity:e04_dielectric_coating_polarized_45deg_350.gif?300|}}  {{:groups:mg:project_ptb-cavity:e04_dielectric_coating_unpolarized_8deg_780.gif?300|}}{{:groups:mg:project_ptb-cavity:e04_dielectric_coating_polarized_45deg_350.gif?300|}}
 +
 +=====Waveplate=====
 +==== λ/2 ====
 +Company: [[http://www.crylight.com/|Crylight]]
 +  * Typ: WP0210-1550 (with holder: WH1210) http://www.crylight.com/product/detail.jsp?myid=215879
 +   * Type: Opically contacted zero Order
 +   * Diameter: 10mm
 +   * Outer Diameter: 12.7 mm
 +   * Retardation: λ/2
 +   * Wavelength: 1550nm
 +   * Coating: AR/AR
 +   * Size tolerance: +/-0.2
 +   * Retardation tolerance: λ/300
 +   * Surface Quality: 40/20
 +   * Parallislm: <3"
 +   * Wavefront distortion: λ/8 @ 632.8nm
 +   * Clear aperuture: >90%
 +   * Optical axis tolerance: +/-0.3
 +  * Holder: WH1210 
 +  * Test Protocol: {{ :groups:mg:project_ptb-cavity:201708101013.pdf |Test Protocol-Waveplates}}
 +
 +==== λ/4 ====
 +Company: [[http://www.crylight.com/|Crylight]]
 +  * Typ: WP0410-1550 (with holder: WH1210) http://www.crylight.com/product/detail.jsp?myid=215879
 +   * Type: Opically contacted zero Order
 +   * Diameter: 10mm
 +   * Outer Diameter: 12.7 mm
 +   * Retardation: λ/4
 +   * Wavelength: 1550nm
 +   * Coating: AR/AR
 +   * Size tolerance: +/-0.2
 +   * Retardation tolerance: λ/300
 +   * Surface Quality: 40/20
 +   * Parallislm: <3"
 +   * Wavefront distortion: λ/8 @ 632.8nm
 +   * Clear aperuture: >90%
 +   * Optical axis tolerance: +/-0.3
 +  * Holder: WH1210 
 +
 +=====Waveplate Rotation Mount=====
 +Company: Thorlabs
 +  * Typ: RSP05/M https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=246
 +  * Mount Ø1/2" Optics up to 5.8 mm Thick
 +  * Compact: 25.4 mm x 22.1 mm x 11.4 mm 
 +  * Compatible with our SM05-Threaded Lens Tubes
 +  * One SM05RR Retaining Ring Included
 +  * Post Mountable via 8-32 (M4) Mounting Tap
 +  * The knurled edge of the RSP05(/M) and the 360° laser-engraved scale marked at 2° increments allow for precise
 +
 +
 +=====Linear Stages=====
 +Company: Newport
 +  * Typ: M-DS25-X https://www.newport.com/p/M-DS25-X
 +  * Axes of Travel: X
 +  * Maximum Stage Travel: 6.35 mm  
 +  * Load Capacity: 45 N
 +  * Material: Aluminum 
 +  * Centered Load Capacity with BM Micrometer: 11 N  
 +  * Platform Size: 25 x 25 mm 
 +  * Sensitivity: 1 µm  
 +
 +
 +===== Lens =====
 +==== Lens ====
 +Company: Thorlabs
 +  * Typ: LA1805-C https://www.thorlabs.de/thorproduct.cfm?partnumber=LA1805-C
 +  * Size: Ø1" 
 +  * N-BK7 Plano-Convex Lens
 +  * Focal length: f = 30.0 mm
 +  * AR Coating: 1050-1700 nm 
 +
 +==== Lens holder ====
 +
 +Company: Thorlabs
 +  * Typ: LMR1S/M https://www.thorlabs.de/thorproduct.cfm?partnumber=LMR1S/M
 +  * Size: Ø1" 
 +  * Internal and External SM1 Threads
 +  * M4 Tap
 +
 +===== Beamsplitter Cube =====
 +Company: Thorlabs
 +  * Typ: BS012 https://www.thorlabs.com/thorproduct.cfm?partnumber=BS012
 +  * Size: 10.0 x 10.0 mm 
 +  * No Polarization
 +  * Splitting: 50:50
 +  * Wavelength: 1100 - 1600 nm
 +
 +===== Iris =====
 +Company: Thorlabs
 +  * Typ: ID5MS/M https://www.thorlabs.de/newgrouppage9.cfm?objectgroup_id=206&pn=ID5MS/M#3883
 +  * Max Aperture: Ø5.0 mm 
 +  * 38 mm Long
 +  * Ø6 mm Post
 +
 +