meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
groups:mg:project_ptb-cavity:fiber-components [2017/05/17 08:52] – ssauergroups:mg:project_ptb-cavity:fiber-components [2018/01/23 10:32] (current) – ssauer
Line 4: Line 4:
     * english: {{ :groups:mg:project_ptb-cavity:modulatorfibel_en.pdf |Modulatorfibel_english}}     * english: {{ :groups:mg:project_ptb-cavity:modulatorfibel_en.pdf |Modulatorfibel_english}}
     * german: {{ :groups:mg:project_ptb-cavity:modulatorfibel_de.pdf |Modulatorfibel_german}}     * german: {{ :groups:mg:project_ptb-cavity:modulatorfibel_de.pdf |Modulatorfibel_german}}
 +
 +
 +===== Fiber AOM =====
 +
 +Company: [[http://www.amstechnologies.com/de/home/|AMS Technologies AG]], [[http://www.goochandhousego.com|Gooch & Housego Torquay]]
 +<note important>RF power: 0.4 W. Absolute maximum rating (=+26dBm). Higher power will cause damage.</note>
 +  * Typ: SFO4504-T-M080-0.5C8J-3-F2P
 +  * Fiber-coupled acousto-optic modulator, model Fibre-Q http://www.amstechnologies.com/products/optical-technologies/components/optics/acousto-optics/view/fibre-coupled-acousto-optic-modulators/
 +    * Material: Amtir 
 +    * Wavelength: 1550 nm 
 +    * Operation frequency: +80 MHz 
 +    * Polarisation maintaining fiber 
 +    * Fibre length: 0.3M 
 +    * Gibre-connector: FC/APC 
 +    * Datasheet: 
 +      * from AMS technologies: {{ :groups:mg:project_ptb-cavity:sfo4504-t-m080-0.5c8j-3-f2p.pdf |Datasheet_Fiber-AOM-G&HT_AMS}}
 +      * from G&HT internetside: {{ :groups:mg:project_ptb-cavity:gh_ds_fo_fiberq_1550nm_80mhz_low_-power_consumption_fiber_coupled_acousto_optic_modulator.pdf |Datasheet_Fiber-AOM-G&HT_G&HT}}
 +    * Testreport: {{ :groups:mg:project_ptb-cavity:fiber_aom_testreport_g_h.pdf |Fiber-AOM-Testreport-G&H}}
 +
 +Company: [[https://www.laser2000.de/|Laser2000]], [[http://www.brimrose.com/home.html|Brimrose]]
 +<note important>RF power: <0.5 W. Absolute maximum rating (=+27dBm). Higher power will cause damage.</note>
 +  * Typ: BRI-AMF-80-4-1550-2FP-FC/APC-0.3
 +  * Fiber-coupled acousto-optic modulator, 
 +    * Material: Amtir 
 +    * Wavelength: 1550 nm 
 +    * Operation frequency: +80 MHz 
 +    * Polarisation maintaining fiber 
 +    * Fibre length: 0.3M 
 +    * Gibre-connector: FC/APC 
 +    * Datasheet: {{ :groups:mg:project_ptb-cavity:amf80_4_1550_2fp_pm_fcapc_30cmfiber_fb2fer50.pdf |Datasheet_Fiber-AOM-Brimerose}}
 +    * Test Protocol: {{ :groups:mg:project_ptb-cavity:201708101016.pdf |Test Protocol_Fiber-AOM-Brimerose}}
 +
 +
  
 ===== Fiber EOM ===== ===== Fiber EOM =====
 Company: [[https://www.jenoptik.de/|Jenoptik]] Company: [[https://www.jenoptik.de/|Jenoptik]]
 +<note important>Do not apply voltages higher than 40V peak-peak to RF input (=+36dBm).</note>
   * Typ: PM1550   * Typ: PM1550
     * Center wavelength: 1550 nm     * Center wavelength: 1550 nm
Line 20: Line 54:
     * german: {{ :groups:mg:project_ptb-cavity:phasemodulator_de.pdf |Datasheet Fiber-Eom_german}}     * german: {{ :groups:mg:project_ptb-cavity:phasemodulator_de.pdf |Datasheet Fiber-Eom_german}}
     * english: {{ :groups:mg:project_ptb-cavity:phasemodulators_en.pdf |Datasheet Fiber-Eom_english}}     * english: {{ :groups:mg:project_ptb-cavity:phasemodulators_en.pdf |Datasheet Fiber-Eom_english}}
-<note important>Do not apply voltages higher than 40V peak to RF input.</note>+    * supplied: 
 +{{:groups:mg:project_ptb-cavity:image_datasheet_eom.jpg?300|}} 
 + 
 + 
 +===== Fiber FRM ===== 
 +Company: [[https://www.laser2000.de/|Laser2000]], [[//https://www.generalphotonics.com|General Photonics]] 
 +  * Typ: NFRM-15-FCA 
 +      * Operating Wavelength: 1550 nm 
 +      * Operating Bandwidth: ±50 nm 
 +      * Insertion Loss: 
 +        * typical: 0.3 dB 
 +        * max: 0.5 dB 
 +        * Faraday Rotation Angle: 90 degrees 
 +        * Rotation Angle Tolerance (Center Wavelength at 23 °C): ±1 degree  
 +        * Rotation Angle Wavelength Dependence: ±0.12 degree/nm 
 +        * Rotation Angle Temperature Dependence: ±0.12 degree/°C 
 +        * Reflection Polarization Dependence: 0.5% max.  
 +        * Optical Power Handling: 300 mW min. 
 +        * Operating Temperature 0 to 70 °C  
 +        * Storage Temperature:  -40 to 85 °C  
 +        * Fiber Type: SMF-28  
 +        * Dimensions: Ø 9.5 × 50 mm (NoTail) 
 +  * Datasheet: {{ :groups:mg:project_ptb-cavity:frm.pdf |}}
  
 ===== Fiber Coupler ===== ===== Fiber Coupler =====