Differences

This shows you the differences between two versions of the page.

--- groups:mg:laserdesign:quantuslaser [2019/03/07 14:18] – klaus
+++ groups:mg:laserdesign:quantuslaser [2019/03/07 14:35] (current) – klaus
@@ Line 4: / Line 4: @@
 [{{ :groups:mg:laserdesign:schema.png?600 |ECDL from top-view. LD: Laserdiode, Lx: Lenses, IF: Interference Filter, OC: Outcuppling Mirror, PZT: Piezo}}]
+The basic principle of the laser is the following. The Lense L1 collimates the divergent beam of the Laserdiode (LD). The collimated light passes through an interference filter (IF) which can be used to coarsly steer the frequency. And additional Lense L2 focusses down the light ontop of a flat mirror (OC). This configutation is also known as cat-eye configuration and is less sensitive to imperfections in the orientation of the mirror.
+The laser-resonator now spans from the rear facette of the laser diode (not visible in the picture) to the mirror (OC).
+An additional lense (L3) is no utilized to collimate the resulting beam.
+===== Outline =====
+  * Preparation
+  * Implementing the electronic components
+  * Installation of the laserdiode
+  * Setting up the resonator
+==== Preparation ====
+  * Unordered List Item