meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
groups:mg:htc-3000 [2020/02/06 11:14] – [Configuration for Peltier Elements and Resisitive Heaters] fienegroups:mg:htc-3000 [2024/03/20 09:36] (current) – Admin: Syntax-Update (Migration from deprecated "fontcolor" plugin to "color" plugin) klaus
Line 12: Line 12:
  
 The right switch has two positions: The right switch has two positions:
-  * In the upper position the current voltage output by the HTC in order to monitor the current temperature is displayed. +  * In the lower position the current voltage output by the HTC in order to monitor the current temperature is displayed. 
-  * In the lower position the voltage corresponding to the wanted temperature is displayed. +  * In the upper position the voltage corresponding to the wanted temperature is displayed. 
-While you <fc #ff0000>can't</fc> directly read the current temperature, the display allows you to gauge how well the system's temperature is stabilized or see if there are any problems.\\+While you <color #ff0000>can't</color> directly read the current temperature, the display allows you to gauge how well the system's temperature is stabilized or see if there are any problems.\\
  
 The left switch enables or disables the output temperature. Turn off while changing the set temperature.\\ The left switch enables or disables the output temperature. Turn off while changing the set temperature.\\
Line 76: Line 76:
 The necessary temperatures are: The necessary temperatures are:
 ^ SHG  ^ Temperature  ^ Voltage  ^ ^ SHG  ^ Temperature  ^ Voltage  ^
-| #1 | 38,6 °C | 0,48 V | +| #1   | 38,6 °C      | 0,48 V   | 
-| #2 | 29,3 °C | 0,97 V | +| #2   | 29,3 °C      | 0,97 V   | 
-| #3 | 18,8 °C | |+| #3   | 18,8 °C      | 1,64 V   |
 (Status of 04.02.2020) (Status of 04.02.2020)